Sodium Hydroxide Manufacturers and Suppliers in Singapore

February 10,2023

Manufacturers and Suppliers of Sodium Hydroxide in Singapore

The National Environment Agency requires Sodium Hydroxide Manufacturers and Suppliers in Singapore to follow strict requirements. This is done to safeguard both human health and the natural environment.

Sodium Hydroxide, often known as Caustic soda or lye, is a powerful basic chemical that comes as clumps, sticks, grains, and shards. It absorbs water, ethanol, and glycerol rapidly.

Ultrafiltration (UF) is a pressure-driven barrier to suspended solids, bacteria, viruses, endotoxins and other pathogens to produce water with very high purity and low silt density. Ultrafiltration System Manufacturer, Supplier & Exporter in India.


It is a caustic agent

Sodium hydroxide is a caustic substance that can be harmful to children if they consume it accidently. This is why it is critical to keep it out of the reach of youngsters and in secure locations.

It can be employed in a variety of sectors, including cleaning goods and soap production. It is also used in water purification and as a pH adjuster in cosmetics.

However, if consumed, it can be detrimental to the digestive tract and respiratory system. It can cause mucosal injury and erosions in the mouth, throat, esophagus, and larynx.

Caustic consumption can result in a variety of injuries, depending on the chemical consumed and the length of time it was in touch with the gastrointestinal tract or respiratory system. The type of harm is determined mostly by whether the chemical was acidic or alkaline, the volume and concentration of the material, and the length of time the substance was in the body.

RO plants used at commercial sites should be maintained and clean on decided schedule time. Commercial RO plant manufacturers bring special warnings that you should consider while cleaning the RO plant at the facility.


It is a cleaning agent

Sodium hydrooxide is a well-known cleaning chemical that dissolves grease, fats, and protein deposits. It is frequently used to clean stainless steel and glass bakeware, as well as stoves and household equipment.

It is a cleaning agent as well as a degreaser. It is very soluble in water and can be used to remove various stains, oils, and grease.

It's a typical element in drain cleaners, whether they're dry crystals or thick liquid gels. It dissolves grease and other solid debris and may disintegrate proteins that might clog pipes, such as hair protein.

When handling sodium hydroxide chemical, especially in big volumes, it might be hazardous. It can cause burns to the eyes, skin, and internal organs. When handling it, workers should wear rubber gloves and protective clothes. It is also suggested that they use face shields to protect themselves from dust. Furthermore, personnel must understand how to use this drug safely.

It is a degreaser

To remove oils, grease, and fat from metal surfaces, sodium hydroxide is used as a degreaser. It can be heated and mixed with water to clean process equipment, storage tanks, and waste disposal pipelines.

It dissolves in a range of solvents, including ethanol and methanol, but it is less soluble in ether. It is also quite hygroscopic, so keep it in an airtight container.

Potassium hydroxide is another form of degreasing agent (KOH). Although potassium hydroxide has a lower boiling point than sodium hydroxide, it can dissolve more oils and fats. It can more easily penetrate oil molecules, allowing it to dissolve their link faster.

Unlike sodium hydroxide, which may generate heat when it reacts with strong acids and water, KOH is inert. When cleaning metal surfaces, this makes it a safer alternative to sodium hydroxide. It is not, however, appropriate for all purposes. When used in excessive concentrations, it can react with some types of paints and cause chemical burns.

It is a solvent

The solvent sodium hydroxide can be used to extract dissolved metals such as zinc and copper. The precipitation reaction is a typical method for removing dissolved metals from liquids.

Sodium hydroxide, on the other hand, is corrosive to skin and flesh. As a result, it is preferable to prevent skin contact when working with this material.

Dilute sodium hydroxide with water to dissolve it. This increases its solubility and lowers the pH of the solution to a more basic level.

Sodium hydroxide, in addition to being a solvent, is unique among basic chemicals in that it can easily dissolve glass. Even a concentrated solution will do this over time, but molten sodium hydroxide is much stronger and will dissolve glass much faster. This is why it is critical to keep molten sodium hydroxide in a thick plastic container. It is also highly exothermic, which means that any heat generated by its melting or boiling causes chemical burns and can ignite flammables.

What Do You Want To Search For?

Here you can search for the content you want to view